Caged Bird Tag

I used two more Sizzix products in this piece. I was recently given the Tim Holtz 'Alterations' Sizzix Caged Bird die and  I also used the 'Bingo' embossing folder.

I took some more of the metallic fantasy paper I have had for such a long time and put this through the Big Shot using the embossing folder.  The numbers from the die were really popping on the metallic paper.  I then randomly dabbed over it with some gold Ranger paint dabber and rubbed off a lot with a dry paper towel.  I dried with a heat gun to set the paint.

Once dry the embossed and painted paper was put through the Big Shot again using the Caged Bird die which does such a fab job of making the cage, bird body and wing.  I next took the bird and wing and dabbed over the raised portions with a dark brown chalk pad and whilst still wet dusted over with detail clear embossing powder and heat set this carefully.  This enhanced the brown chalk ink a lot.  I next took a piece of duck-egg blue embossed card and attached the cage carefully with Glossy Accents without sticking down the central bars. This was then trimmed out around the outside of the cage.  The bird body was glued in place by sliding between the bars and the wing attached last over the bars.

I embellished the holes at the bottom of the cage with some blue dimensional paint and a blob of Stickles glitter glue and applied a self adhesive gem for an eye for the bird.  The hole at the top of the cage was threaded with gold elasticated cord wrapped around with blue eyelash fibres as the hanger.

I was originally going to put this onto another background but decided it looked good to me as it was.  Very shiny and blingy.......as I love this finish !

Sid xx